Abstract
This paper presents stub columns tests on concrete-filled double skin sandwich tubes (CFDT) constructed using cold-formed steel tubes. The annulus is filled with micro high-strength concrete having compressive cylinder strength of 64 MPa. The outer skin is made of circular hollow sections (CHS), while the inner skin is made of square hollow sections (SHS). Eight different section sizes were used for the outer skin with diameter-to-thickness ratio ranging from 19 to 55. Three section sizes were chosen for the inner skin with width-to-thickness ratio in the range of 20 to 26. The CFDT construction was found to have significant increase in strength, ductility and energy absorption over the outer jacket. A simplified formula is derived to determine the compressive capacity of CFDT and compared against the current design rules. The proposed formula was found in good agreement with experimental results. This paper also verifies the yield slenderness limit (λ ey) of 82 specified in AS 4100 for cold-formed CHS stub columns.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
