Abstract
To investigate the flexural behaviors of cold-formed steel channel beams with web holes and assess the reliability of the current direct strength method (DSM) for design of cold-formed steel beams with web holes stipulated in North American Specification (NAS) (2016), ten groups of specimens with various sizes of web holes and lips were tested under four-point bending. Among them, each kind of specimens with short lips or long lips have five kinds of hole height-to-web depth ratios, 0, 0.2, 0.4, 0.6 and 0.8. It is shown that the web holes change the failure modes of beams from only distortional buckling or only local buckling to distortional-local buckling interaction controlled by distortional buckling or local-distortional buckling interaction controlled by local buckling. It is found that the moment capacities reduce slightly with a maximum reduction value of 7.0% when the ratio of hole height-to-web depth increases from 0 to 0.4, and that the moment capacities reduce dramatically with a maximum reduction value of 16.3% when the ratio of hole height-to-web depth further increases to 0.8. Moreover, ANSYS finite element (FE) program was used to simulate the beam tests, the simulation results show good agreement with the test results in terms of moment capacities and failure modes. Extensive ANSYS FE parametric analysis were carried out to verify the accurateness of critical elastic distortional buckling stress prediction method using CUFSM finite strip program and to modify the existed approximate prediction formulas of critical elastic local buckling stress applying to such beams with web holes. Furthermore, the test results and parametric analysis results were compared with the current DSM prediction results of cold-formed steel beams with web holes. It is found that the DSM in NAS (2016) provides unconservative predictions for most cold-formed steel channel beams with web holes, especially for beams failed by local-distortional buckling interaction controlled by local buckling. Therefore, the modified direct strength method formulas for cold-formed steel beams with web holes were proposed.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
