Abstract
The present work introduces a novel circular notched miniature tensile creep (CNMTC) specimen which is used to study the influence of notches on creep and of multiaxial stress states on microstructural evolution in Ni-based single crystal (SX) superalloys. It is briefly discussed how mild circular notches affect the stress state in the notch root of a tensile bar during elastic loading. Then the stress redistribution under creep conditions is calculated using the finite element method (FEM), assuming isotropic material behavior. Two series of interrupted creep experiments with the Ni-based single crystal superalloy ERBO1 (CMSX-4 type) were then performed at 950°C, with flat uniaxial miniature tensile creep (FUMTC) and CNMTC <100> specimens, respectively. The evolution of cavities and microcracks in both types of specimens was carefully analyzed after 81, 169, and 306h. In the uniaxial experiments, a growth of cast pores and the formation of new creep cavities were observed. These degradation processes were much less pronounced in the circular notched specimens. The results of the present work are discussed in the light of previous findings on the influence of multiaxial stress states on creep in single crystal superalloys.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
