Abstract

Propellant management devices (PMDs) are a key component used to manage liquid propellant in a propellant tank under zero gravity conditions. A microgravity drop tower test system was established to investigate the performance of a PMD. A single module was used for the experiments, and the microgravity level was less than 3 × 10 − 3 g . Anhydrous ethanol was used as the simulate liquid. Different volume fractions of liquid were used to study the influence of the PMD on performance management. Experiments were conducted with the position of the container oriented in different directions. Changes in the gas-liquid interface were studied during the test. This kind of vane transports liquid through the rectangular area between the vane and the wall. The velocity flows along the vane of different liquid volume fractions in the tank were different at the beginning ( t < 0.8 s ) compared with the end of the test. The liquid relocation time was less than 0.8 s while the liquid volume fraction was larger than 25%. The liquid relocation time was prolonged when the liquid volume fraction was less than 25%. The liquid climbing height along the vane under microgravity increased as the volume fraction of liquid reduced. The climbing velocity of the liquid is half reduction when the liquid volume fraction is small. The time for the liquid transferred from the top of the tank to the liquid outlet can be obtained by climbing velocity. It shows that the maneuverability of the satellite decreases at the end of its life. The above results are applicable to all propellant tank with vertical vanes. These results provide a favorable reference for further optimized design of vertical vane-type propellant tanks.

Highlights

  • For liquid propulsion in a satellite, a propellant tank is used to store the propellant

  • The liquid relocation time is 0.8 s when the liquid volume fraction is larger than 25%

  • The liquid climbing height increases, and the relocation time is prolonged as the liquid volume fraction reduces

Read more

Summary

Introduction

For liquid propulsion in a satellite, a propellant tank is used to store the propellant. One approach to evaluate the performance of a vane-type PMD is the drop tower test. Kang et al [22] and Liu et al [23] investigated the fluid-gas interface in a vane-type surface tension tank by the drop tower test. From the result of the drop tower test, the gas-liquid distribution in the tank during the whole life of the satellite decreases can be obtained. From the drop tower test, the time for the liquid transferred from the top of the tank to the liquid outlet can be obtained. These results provide a favorable reference for the attitude control of a satellite

Drop Tower System
Test Model
Experimental Result
Findings
Conclusions
Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.