Abstract
Excilamps are new UV sources with great potential for application in wastewater treatment. In the present work, a KrCl excilamp emitting radiation at 222 nm has been used for the photodegradation of 4-chlorophenol within a range of concentrations from 50 to 500 mg L −1. The photodegradation process has been shown to form two main photoproduct intermediates, benzoquinone and hydroquinone. Total removal of 4-chlorophenol was shown for all concentrations assayed, and, for both main intermediates, residual concentrations of 20–30% of the initial concentration of 4-chlorophenol remained. Their increasing presence with increasing initial concentrations of 4-chlorophenol had the effect of decreasing the removal efficiency of the photoproducts. In order to simulate the process and scale-up a simplified kinetic model has been developed and validated from the experimental data.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Chemical Engineering & Processing: Process Intensification
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.