Abstract

SUMMARY In this work, the propagation and attenuation of vertically polarized surface waves when interacting with terraced slopes is studied experimentally and numerically. To validate the devised simulation, a laboratory-scale physical model is tested in order to examine the attenuation properties of this well-known artificial landform. The experiment involves formation of a terraced slope, in a laboratory setup, via use of an unconsolidated granular medium made of silica microbeads. This granular medium exhibits a gravity-induced power-law stiffness profile, resulting in a depth-dependent velocity profile. A piezoelectric actuator was used to excite vertically polarized surface acoustic modes localized near the surface of the medium. The three components of the particle velocity field of these modes were measured by means of a 3-D laser Doppler vibrometer. In accordance with the terraced slope, a simple inclined plane was further tested to investigate and highlight the differences in terms of wave propagation along these two different ground formations. The results of this research provide significant experimental evidence that the terraced slopes form mechanisms which attenuate low-frequency surface waves, thus acting as metasurfaces. This work suggests the use of laboratory-scale physical models to investigate the wave propagation in different landforms, which extend beyond typical horizontal ground morphologies, and which could be linked to atypical wave propagation properties, possibly even influencing propagation of seismic waves.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call