Abstract
Herein, ternary active layer‐based polymer solar cells using two donor (D)–acceptor (A) conjugated polymers P1 and P3 having same A unit and different D units as donor along with the nonfullerene small molecule acceptor, BThIND‐Cl, are fabricated. The polymer solar cells based on P1:BThIND‐Cl and P3:BThIND‐Cl binary show power conversion efficiency of 12.13% and 13.08% with energy loss of 0.60 and 0.51 eV, respectively. The open circuit voltage of the P3 based polymer solar cells is higher than that for P1 counterpart associated with the deeper highest occupied molecular orbital (HOMO) energy level of P3 as compared to the P1. The small energy loss for P3 may be attributed to low HOMO offset between P3 and BThIND‐Cl. Moreover, the short circuit current density is higher for the P1 based polymer solar cell. Taking the advantages of high valve of short circuit current for P1 and larger value of open circuit voltage for P3 counterpart, optimized polymer solar cells using these two polymers and BThIND‐Cl as acceptor and after the optimization, the polymer solar cells based on P1:P3:BThIND‐Cl showed overall power conversion efficiency of 15.78% with energy loss of 0.55 eV.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
