Abstract
Microwatt power oscillation devices at sub-terahertz frequency region between 0.3 and 1.0 terahertz (THz) were fabricated from high-Tc superconducting single crystalline Bi2Sr2CaCu2O8+δ and used as a source of the transmission terahertz imaging system. As test examples, terahertz images of coins and a razor blade placed inside the brownish paper envelopes with the spatial resolution of 1 mm are presented. The signal-to-noise ratio exceeds 130 in these images. Using a simple wedge-shaped interferometer and analysing the interference fringe pattern, the wavelength of the terahertz wave is calibrated within 0.1% accuracy. This interferometer also provides a simple method to measure the absorption coefficient of the liquid sample. Two test measurements for distilled water and ethanol are demonstrated and their absorption coefficients are obtained with 99.2% accuracy. This suggests that our terahertz imaging system can be applied to many practical applications, such as biological and biomedical imaging, environmental monitoring, microanalysis of impurities, structure and dynamical analyses of large molecules and ions in solution.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.