Abstract

We have designed, fabricated, and experimentally characterized a lens for the THz regime based on artificial dielectrics. These are man-made media that mimic properties of naturally occurring dielectric media, or even manifest properties that cannot generally occur in nature. For example, the well-known dielectric property, the refractive index, which usually has a value greater than unity, can have a value less than unity in an artificial dielectric. For our lens, the artificial-dielectric medium is made up of a parallel stack of 100 μm thick metal plates that form an array of parallel-plate waveguides. The convergent lens has a plano-concave geometry, in contrast to conventional dielectric lenses. Our results demonstrate that this lens is capable of focusing a 2 cm diameter beam to a spot size of 4 mm, at the design frequency of 0.17 THz. The results further demonstrate that the overall power transmission of the lens can be better than certain conventional dielectric lenses commonly used in the THz regime. Intriguingly, we also observe that under certain conditions, the lens boundary demarcated by the discontinuous plate edges actually resembles a smooth continuous surface. These results highlight the importance of this artificial-dielectric technology for the development of future THz-wave devices.

Highlights

  • We have designed, fabricated, and experimentally characterized a lens for the THz regime based on artificial dielectrics

  • The artificial-dielectric medium is made up of a parallel stack of 100 μm thick metal plates that form an array of parallel-plate waveguides

  • The results further demonstrate that the overall power transmission of the lens can be better than certain conventional dielectric lenses commonly used in the THz regime

Read more

Summary

OPEN Terahertz Artificial Dielectric Lens

Rajind Mendis[1], Masaya Nagai[2], Yiqiu Wang[3], Nicholas Karl1 & Daniel M. We have designed, fabricated, and experimentally characterized a lens for the THz regime based on artificial dielectrics These are man-made media that mimic properties of naturally occurring dielectric media, or even manifest properties that cannot generally occur in nature. We observe that under certain conditions, the lens boundary demarcated by the discontinuous plate edges resembles a smooth continuous surface These results highlight the importance of this artificial-dielectric technology for the development of future THz-wave devices. Considering the phase velocity of the TE1 mode, we can derive an effective refractive index n, analogous to a conventional dielectric[4] It follows that n is frequency dependent such that 0 ≤ n < 1, where the equality holds at the mode’s cutoff frequency.

Device Design and Fabrication
Transmission Measurement
Reflection Measurement
Device Performance
Findings
Additional Information
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call