Abstract
Low temperature brittleness and high ductile-to-brittle transition temperature (DBTT) are potential drawbacks related to the mechanical properties of tungsten (W) for divertor application in fusion reactors. In the present study, to improve the mechanical properties of W, rhenium (Re) addition has been applied as a solid solution alloying method. In this paper, the effects of Re addition on the tensile and Charpy impact properties of W thick plate fabricated by powder metallurgy and hot rolling were investigated, which has enough volume as the plasma facing material and the microstructural uniformity for mass-production. At the temperature below 1000 °C, the W-3%Re showed 5–30% higher strength, 10–35% higher total elongation, 100 °C lower DBTT, and 16% higher upper shelf energy than those of the pure W.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
