Abstract
AbstractA double‐layer double‐wavelength antireflective (AR) coating with 100% transmittance at both 1064 nm and 532 nm, which is very important in high power laser systems, is designed using thin film design software (TFCalc). The refractive indices for the bottom and top layers of the designed AR coating are about 1.30 and 1.14. A simple, template‐free sol‐gel route is proposed to prepare the superhydrophobic ORMOSIL (organically modified silicate) thin film, which has an ultralow refractive index, by silica particle surface modification using hexamethylisilazane (HMDS); this treatment decreases the refractive index of the silica thin film from 1.23 to 1.13. The formation mechanism of the ultralow refractive index thin film is proposed. The particle surface modification with HMDS significantly improves the hydrophobicity of the coated film; the water contact angle of the film increases from 23.4° to 160°. The bottom layer, which has a refractive index of 1.30, is prepared from acid‐catalyzed and base‐catalyzed mixed silica sol. A double‐layer silica AR coating is obtained with transmittances of 99.6% and 99.8% at 532 nm and 1064 nm, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
