Abstract
The development of an etched fiber Bragg grating (eFBG)-based temperature sensor with a uniform multi-layer molybdenum-di-sulphide (MoS2) coating is presented in this paper. Multi-layer MoS2 has been coated on clad etched FBG sensors by DC magnetron sputtering of molybdenum (Mo) and subsequent sulfurization. The dependence of temperature sensitivity on the coating thickness of MoS2 on eFBGs has been tested from room temperature to 100°C. It has been found that MoS2 coated clad etched FBG sensors with a coating thickness of around 10nm exhibit a maximum temperature sensitivity of ∼95 pm/°C (almost one order higher than that of bare fiber Bragg gratings), with a resolution of ∼0.01°C obtained using an FBG interrogator with 1pm resolution.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
