Temperature Field Characterization of Iron Tailings Based on Microwave Maintenance Technology.

Abstract

Microwave maintenance technology, as a new development trend, can realize the environmentally noninvasive and rapid repair of asphalt pavement and gradually replace traditional maintenance methods. Iron tailings were used as a self-healing material in this study to investigate the temperature response matching of microwave maintenance technology. Firstly, the physical properties and the mechanism of iron tailings were elaborated through macroscopic physical index testing and microscopic X-ray diffraction (XRD) analysis. Secondly, the applicability of aggregates to microwave heating was demonstrated by analyzing the temperature rise characteristics of the granules using infrared imaging. Then, the temperature field variation rules of the iron tailing asphalt mixture were summarized by microwave heating Marshall specimens. Finally, the road performance was assessed by conducting high-temperature dynamic stability, low-temperature tensile, water immersion Marshall, and freeze-thaw splitting tests. The experimental results showed that the iron tailings can be used as an aggregate for high-grade asphalt pavement and as the preferred aggregate for microwave maintenance technology. The iron tailings temperature field was radial from the inside out to provide different temperature response states for different pavement diseases, so the asphalt was dissolved and precipitated in a short time. The particle size of iron tailings was inversely proportional to the wave-absorbing heating rate, and the heating efficiency of the small particle size (0-4.75 mm) was the highest. The specimens doped with 4.75-13.2 mm iron tailings showed the best heating performance and road performance, with the average surface temperature of the specimens reaching 126.0 °C within 2 min. In summary, according to different disease types and construction needs, iron tailings can be used as an aggregate for asphalt pavement, providing an appropriate temperature field and improving the efficiency of the microwave maintenance of asphalt pavements.