Abstract
The application field of glued-in rods (GiRs) has been extended over the years to include new timber constructions thanks to their high stiffness and to the technical solutions they offer to achieve high mechanical performance. However, the mechanical behavior of GiRs seems to be affected by several parameters, and in particular by temperature changes. This paper presents an experimental investigation on the mechanical behavior of GiRs bonded parallel and perpendicular to wood grain by means of pull-out tests at stabilized temperature and at constant load. In addition, complementary physico-chemical and mechanical characterizations were carried out on the bulk epoxy adhesive which was used for the fabrication of the GiRs specimens, in order to correlate the temperature behavior of the overall GiR connection to that of the polymer adhesive. Results of pull-out tests revealed a gap between experiments performed at stabilized temperature and those at constant load. Such a gap was attributed to physical, chemical and mechanical phenomena occurring in the epoxy resin at high temperature, and highlighted the major influence of the resin glass transition (Tg) of the polymer adhesive on the temperature behavior of the GiR connection.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.