Abstract
Microchannel (MC) emulsification is a promising technique to produce monodisperse emulsions by spontaneous interfacial-tension-driven droplet generation. The purpose of this study was to systematically characterize the effect of temperature on droplet generation by MC emulsification, which is a major uncharted area. The temperature of an MC emulsification module was controlled between 10 and 70°C. Refined soybean oil was used as the dispersed phase and a Milli-Q water solution containing sodium dodecyl sulfate (1 wt%) as the continuous phase. Monodisperse oil-in-water (O/W) emulsions with a coefficient of variation below 4% were produced, and at all the operating temperatures, their average droplet diameter ranged from 32 to 38 μm. We also investigated the effect of flow velocity of the dispersed phase on droplet generation characteristics. The maximum droplet generation rate (frequency) from a channel at 70°C exceeded that at 10°C by 8.1 times, due to the remarkable decrease in viscosity of the two phases. Analysis using dimensionless numbers indicated that the flow of the dispersed phase during droplet generation could be explained using an adapted capillary number that includes the effect of the contact angle of the dispersed phase to the chip surface.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
