Abstract
Abstract Oil-based nanofluids were prepared by dispersing copper nanoparticles into a high-temperature synthetic oil using a two-step method. The nanofluid stability was evaluated by measuring the effective thermal conductivity over time. The thermophysical properties of the nanofluids were investigated by measuring the effective thermal conductivity up to a maximum temperature of 210 °C using the transient hot wire method. The thermal conductivity was increased with increasing Cu nanoparticle volume fraction and decreased with temperature between 30 and 210 °C. A maximum thermal conductivity enhancement of about 18% was obtained at 30 °C with the 0.02 volume fraction of Cu nanoparticles. The experimental data below 150 °C compares well with predictions of the Jang and Choi model. Above 150 °C, the effective thermal conductivity enhancement is much lower than predicted by the model, so new mechanisms are needed to explain this phenomenon.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
