Abstract

Responsivity of silicon photodiodes was measured from -100 C to +50 C in the 3 to 250 nm wavelength range using synchrotron and laboratory radiation sources. Two types of silicon photodiodes were studied, the AXUV series having a thin nitrided silicon dioxide surface layer and the SXUV series having a thin metal silicide surface layer. Depending on the wavelength, the responsivity increases with temperature with the rates 0.013%/C to 0.053%/C for the AXUV photodiode and 0.020%/C to 0.084%/C for the SXUV photodiode. The increase in responsivity is consistent with the decrease in the silicon bandgap energy which causes a decrease in the pair creation energy. These results are particularly important for dose measurement in extreme ultraviolet (EUV) lithography steppers and sources since the detector temperature often increases because of the high EUV intensities involved.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.