Abstract

In this paper, the temperature dependence of resistance of two generic RuO2-based resistors is investigated. The resistor compositions studied are 80 wt.% glass (63 wt.% PbO - 25 wt.% B2O3 - 12 wt.% SiO2, designated as G1) - 20 wt.% RuO2 and 80 wt.% glass (55.5 wt.% PbO - 22 wt.% B2O3 - 10.5 wt.% SiO2 - 12 wt.% Al2O3, designated as G2) - 20 wt.% RuO2. The sheet resistance of resistor 80 wt.% G1 - 20 wt.% RuO2 fired at 850° C decreases as the temperature is increased from 100 K to ∼400 K, remains a minimum value at temperatures 400 K ∼690 K, and then increases as the temperature is further raised. A negative temperature coefficient of resistance (TCR) of ∼-480 ppm/°C is obtained from 100 K to 500 K. TheTCR becomes less negative when temperature increases. Three models for conduction mechanism of thick film resistors are employed to explain the experimental results. A modified model, consisting of both tunneling and parallel conduction approaches, is proposed to elucidate the change in slope in the resistance-inverse temperature curve as well as the temperature dependence of the resistance. In addition, an equivalent circuit model is proposed to describe the electrical behavior of the thick film resistors.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call