Temperature dependence of spectral and laser properties of Er3+/Al3+ co-doped aluminosilicate fiber

Abstract

Using a heavily erbium-doped aluminosilicate fiber prepared by the sol-gel method combined with high temperature sintering, the temperature dependence of the spectrum around the 1.55 nm band and single-mode fiber laser properties were investigated, respectively. The absorption cross section increases 29.2% at ～1558 nm with the temperature increasing from 20°C to 140°C, while the emission cross section slightly increases 4.3%. In addition, the laser slope of the heavily erbium-doped aluminosilicate fiber at 1558 nm decreases 4.4% from 10.8% to 6.4% with the temperature increasing from 18°C to 440°C. Meanwhile, an experiment lasting 3 h proves that the fiber laser has excellent stability below 440°C.