Abstract
Numerous control strategies of temperature regulation have been carried out for proton-exchange membrane fuel cell systems including a cooling fan in order to ensure operation at the desired condition and extend the lifetime of the fuel cell stack. However, most existing control strategies are developed without considering the efficiency limitation of the cooling system such that the cooling fan may be unable to eliminate the additional heat. Moreover, there are unknown modelling errors, external disturbance and noise during modelling and experiment processes for fuel cells. Due to those unknown dynamics, the conventional control strategies may fail to achieve the expectant results. To address this issue, an alternative control strategy is proposed in this paper, which consists of a composite proportional-integral (PI) controller with an unknown system dynamics estimator. First, the control strategy is developed by reducing the temperature of input air through the humidifier and simultaneously increasing the mass flow of air in order to eliminate the excess heat that a cooling fan cannot remove. Moreover, an unknown system dynamics estimator is proposed in order to compensate the effect of the unknown dynamics. The construction of the estimator is designed through finding an invariant manifold which implies the relation between known variables and the unknown manifold. The invariant manifold is derived by applying a simple low-pass filter to the system which is beneficial to avoid the requirement of the unmeasurable state derivative. Furthermore, the proposed estimator is easily merged into the proposed PI control strategy and ensures the exponential convergence of estimated errors. Besides, the estimator is further modified such that the derivative of the desired temperature is not required in the controller. Finally, numerical simulations of the PEMFC system are provided and the results illustrate the efficacy of the proposed control strategy.
Highlights
Proton-exchange membrane fuel cell (PEMFC) is regarded as one of the cleanest alternative energy conversions which is promising to replace traditional power generation technologies [1]. e energy conversion principle of PEMFC is to transform chemical energy into electricity, thermal energy, and water without requiring any moving part
In [9], the temperature control strategy was proposed for a PEMFC system with a water cooling system, where the voltage of a water circulation pump was manipulated through a PI controller, and a water cooling fan was under the on/off modes
A composite PI control with the unknown system dynamics estimator (USDE) is proposed for a PEMFC system
Summary
Proton-exchange membrane fuel cell (PEMFC) is regarded as one of the cleanest alternative energy conversions which is promising to replace traditional power generation technologies [1]. e energy conversion principle of PEMFC is to transform chemical energy into electricity, thermal energy, and water without requiring any moving part. Due to its properties of low operation temperature and fast start-up compared with other types of fuel cells, it has drawn wide attention in the fields of power station systems and vehicle systems [2, 3]. Temperature regulation of PEMFC stack is essential to ensure the high operation efficiency, avoid the thermal fatigue, and prolong the stack lifespan [6, 7]. In [9], the temperature control strategy was proposed for a PEMFC system with a water cooling system, where the voltage of a water circulation pump was manipulated through a PI controller, and a water cooling fan was under the on/off modes. In [10], a more advanced fuzzy logic controller was applied to regulate the speed of the cooling fan and increase the convection ratio between PEMFC and atmosphere.
Sign-in/Register to view highlights & summary Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
