Abstract

Supermartensitic is a new class of stainless steels used as seamless pipes and forged parts in the oil and gas off shore production. The final mechanical properties of the steel are adjusted by quenching and tempering heat treatments. In this work, a Ti alloyed supermartensitic stainless steel was quenched and tempered at 500 °C, 570 °C, 620 °C and 640 °C. Specimens tempered at 500 °C showed very low toughness and brittle fracture in low temperature Charpy tests. This temper embrittlement effect was detected by magnetic Barkhausen noise (MBN) inspection. Specimens tempered at 620 °C and 640 °C were cooled in water or in furnace after tempering, and those slowly cooled had lower toughness and higher austenite volume fraction. In this case, MBN could not detect the embrittlement effect, probably due to the high austenite (paramagnetic phase) content.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call