Abstract
AbstractEffective haptic performance in teleoperation control systems can be achieved by solving two major problems: the time‐delay in communication channels and the transparency of force control. The time‐delay in communication channels causes poor performance and even instability in a system. The transparency of force feedback is important for an operator to improve the performance of a given task. This article suggests a possible solution for these two problems through the implementation of a teleoperation control system between the master haptic device and the slave mobile robot. Regulation of the contact force in the slave mobile robot is achieved by introducing a position‐based impedance force control scheme in the slave robot. The time‐delay problem is addressed by forming a Smith predictor configuration in the teleoperation control environment. The configuration of the Smith predictor structure takes the time‐delay term out of the characteristic equation in order to make the system stable when the system model is given a priori. Since the Smith predictor is formulated from exact linear modeling, a neural network is employed to identify and model the slave robot system as a nonlinear model estimator. Simulation studies of several control schemes are performed. Experimental studies are conducted to verify the performance of the proposed control scheme by regulating the contact force of a mobile robot through the master haptic device.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.