Abstract
ABSTRACT A mining operation uses mechanical vapor recompression to treat mine tailings water for discharge to the environment. To maintain the mine’s operations, the removal of an additional 1 MLD of water is required. The water has a high TDS, is supersaturated, and a low pH. A range of water treatment technologies were reviewed and assessed. It was determined that a membrane system was the best option to deploy, and an NF/RO system was recommended for further evaluation. However, because the tailings water pH is in the vicinity of most membrane isoelectric points (~3-4), electrostatic rejection would be greatly affected, allowing excessive ion transmission to the permeate. It was hypothesized that a membrane with an isoelectric point >4 would provide enhanced rejection. Two acid resistant NF polymeric membranes with isoelectric points at approximately pH 5 were tested at laboratory scale. The volume recovery was restricted due to supersaturation chemistry limitations, not osmotic pressure or the operating pressure of the selected membranes. An overall system recovery of ~50% was achievable. An integrated flowsheet was developed for a system that required significantly less capital and energy that an additional thermal evaporation process.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
