Technology for Producing Heat From Composite Coal Fuels in Advanced Oven for Municipal and Household Use

Abstract

The problem of rational use of coal remains relevant; currently, various technologies have been developed for producing composite solid fuels, briquettes with various binding materials from brown coal deposits in Kyrgyzstan. The widespread use of composite solid fuels (CSF) and coal briquettes in industry, everyday life and public utilities, in our opinion, is limited by two reasons: excessively inflated requirements of existing standards for the physical and mechanical characteristics of briquettes as a product; poor knowledge of optimal conditions for burning briquettes. Our research shows that compressive strength in the range of 15-20 kgf/cm2 provides the necessary strength for the degree of abrasion during transportation and storage of large-sized rectangular CSFs. Reducing the strength requirement to the value indicated above makes it possible to form briquettes from unsorted culm. Among the numerous known binders for briquetting, inorganic types of clays and loams, which are ubiquitous, deserve special attention. It has been established that clays and loams provide the strength of the CSF over 20 kgf/cm2. For the purpose of beneficial use of low-grade fine coal, we carried out briquetting and combustion testing of the resulting briquettes. It has been established that when briquetting coals from the Zhatan and Kumbel deposits with a clay binder, with an increase in the content of fine coals in the composition, the burning time of the briquette increases, as well as the combustion of the combustible mass increases, and the temperature in the combustion space increases. It has been shown that with the help of appropriate minor modifications of standard household stoves it is possible to significantly increase the combustion efficiency of all types of low-grade fuel, including lignite high-ash CSF.