Technology effects in repowering wind turbines

Abstract

AbstractThis research investigates, analyses, and quantifies the technological effects of wind turbine repowering (ie, where old turbines are removed and new turbines are installed at the same or a very close location, including the enhanced performance in energy production). In these cases, it is assumed that both old and new turbines are subject to the same wind regime, other than because of technological elements, such as hub height, and thus it is possible to isolate the effects of new technology from the effect of changing local wind conditions. This research is based on the analysis of empirical data on repowering turbines in Denmark and Germany, and on historical production data available for the Danish component of the data set. Technological innovations are expected to enable new wind turbines to capture more energy at the repowering site, mostly through larger rotors and higher hub heights, and this is what this study has analysed. The results show that new turbines in repowering projects are twice as high, have three times the rotor diameter, nine times the swept area, six times the nominal power, and nine times as much electricity as the old turbines. However, the most significant improvement is probably the increase of capacity factor of 7.1% on a per‐turbine basis, or 9.7% on a per‐production basis.