Technology criteria for the manufacturing of Rebamipide film-coated tablets

Abstract

Introduction. In the modern world, there are many pharmaceutical substances that have various structure. During the development of finished dosage forms (FDPs) it is necessary to take into account many factors, such as physicochemical and technological properties of substances and excipients, manufacturing technology and others. This work is focused on the application of these approaches in practice in relation to a substance with anisodiametric crystal shape. Rebamipide was chosen as an example of such substance with poor technological characteristics for investigation and manufacturing technology selection.Aim. Research of approaches to examine a substance with anisodiametric crystal shape (Rebamipide in this case) to determine its physicochemical and technological properties in purpose of theoretical substantiation of the best method of manufacturing mass for tabletting.Materials and methods. In this study were used such materials as Rebamipide substance (α-[(4-chlorobenzoyl)amino]-1,2-dihydro-2-oxo-4-quinolinepropanoic acid) (experimental sample). Also were used such equipment as flowability tester ERWEKA GT (Erweka GmbH, Germany), powder density tester ERWEKA SVM 122 (ERWEKA GmbH, Germany), vibrating sieve CISA RP 200N (CISA Cedaceria Industrial S.L., Spain), powder diffractometer D8 ADVANCE (Bruker Corporation, USA), calorimeter DSC 204 F1 (NETZSCH, Germany), Hitachi TM-100 electron microscope (Hitachi, Japan).Results and discussion. The properties of Rebamipide substance were evaluated, such as polymorphism, melting point, microscopy and evaluation of technological characteristics. Application of the SeDeM method allowed to determine the critical parameters of the substance that need to be corrected.Conclusion. It was found out experimentally that Rebamipide substance has polymorphism, high melting point, needle-shaped crystals, poor bulkiness and compactability, which was confirmed by the use of SeDeM method.