Techniques for Increasing Machine Harvest Efficiency in Highbush Blueberry

Abstract

Northern highbush (NH) blueberry (Vaccinium corymbosum) and southern highbush (SH) blueberry (V. corymbosum hybrids) have fruit that vary in firmness. The SH fruit is mostly hand harvested for the fresh market. Hand harvesting is labor-intensive requiring more than 500 hours/acre. Rabbiteye blueberry (V. virgatum) tends to have firmer fruit skin than that of NH blueberry and has been mostly machine harvested for the processing industry. Sparkleberry (V. arboreum) has very firm fruit. With the challenges of labor availability, efforts are under way to produce more marketable fruit using machine harvesting. This could require changing the design of harvesting machine and plant architecture, and the development of cultivars with fruit that will bruise less after impact with hard surfaces of machines. The objectives of this study were to determine the fruit quality of machine-harvested SH blueberry, analyze the effect of drop height and padding the contact surface on fruit quality, investigate the effect of crown restriction on ground loss, and determine the effect of plant size on machine harvestability. The fruit of ‘Farthing’, ‘Scintilla’, ‘Sweetcrisp’, and several selections were either hand harvested or machine harvested and assessed during postharvest storage for bruise damage and softening. Machine harvesting contributed to bruise damage in the fruit and softening in storage. The fruit of firm-textured SH blueberry (‘Farthing’, ‘Sweetcrisp’, and selection FL 05-528) was firmer than that of ‘Scintilla’ after 1 week in cold storage. Fruit drop tests from a height of 20 and 40 inches on a plastic surface showed that ‘Scintilla’ was more susceptible to bruising than that of firm-textured ‘Farthing’ and ‘Sweetcrisp’. When the contact surface was cushioned with a foam sheet, bruise incidence was significantly reduced in all SH blueberry used in the study. Also, the fruit dropped 40 inches developed more bruise damage than those dropped 20 inches. Ground loss during machine harvesting was reduced from 24% to 17% by modifying the rabbiteye blueberry plant architecture. Further modifications to harvesting machines and plant architecture are necessary to improve the quality of machine-harvested SH and rabbiteye blueberry fruit and the overall efficiency of blueberry (Vaccinium species and hybrids) harvesting machines.