Technique developed to study camshaft and tappet wear on real production engine

Abstract

PurposeThis paper aims to present a technique that has been developed to study the wear in the camshaft and tappet. The engine manufacturers use the most suitable materials, lubrication additives and surface coatings to minimize friction in all the components of the engine. Reduced friction results in less wear of critical engine components. The researchers are constantly trying to find an improved lubrication formula which reduces the wear and friction coefficient at a considerably low price. In this regard, the cam follower interface is of much importance because most of the wear occurs in this interface.Design/methodology/approachThe tappets and the cam lobes are analyzed to determine wear. A two-dimensional optical surface profilometer is used to measure the tappet wear, and a high-resolution linear variable differential transformer is used for the measurement of cam lobes. Tests are conducted on Mercedes Benz engine OM 646 under constant camshaft speed, constant inlet lubricant temperature and constant lubricant pressure to study the oil rheology on cam tappet wear.FindingsThe results show that the wear occurs on the cam tappet interface, which is almost a linear phenomenon, and it increases with use.Originality/valueCustomized jigs were made to measure wear of camshaft and tappet.