Abstract
In this study, the distribution and evaporation principles of impurities in distilled magnesium metal were investigated using a low vacuum (8 × 104 Pa) distillation purification experiment and theoretical analysis. Provided all other factors remain unchanged (distillation time, pressure, and total area of evaporation), the optimum temperature for preparing high-purity Mg (99.99%) is 750 °C. A detailed analysis of purified Mg was obtained by inductively coupled plasma mass spectrometer (ICP-MS) for 10 major impurity elements. After distillation at 750 °C, low vapor pressure impurities in condensed magnesium, including Si, Mn, Al, Fe, Cu, Ni, and Sn were significantly reduced as other impurities were slightly reduced. Our analysis confirmed a decrease in the following impurities: Fe, Si, Mn, Cu, and Al were reduced from 21.8, 78.6, 68.4, 4.4, and 39.4 ppm to 1.2, 9.3, 6.0, 1.0, and 5.4 ppm, respectively; satisfying the 99.99% Mg standard. The evaporation rate and separation coefficient were calculated under experimental conditions. To better describe the distillation process of metallic magnesium under low vacuum conditions, the mean free path is also calculated in this study under actual conditions.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have