Abstract
High-temperature gas-cooled reactor-pebble bed module (HTR-PM) of China, based on the technology and experience of the 10MW high-temperature gas-cooled reactor (HTR-10), is currently in the construction phase. The helium blower is the key equipment in the primary loop of the HTR-PM. It drives the helium to flow in the primary loop for energy exchange. Active magnetic bearing (AMB) is replacing ordinary mechanical bearings as the perfect sustaining assembly for the helium blower because they have several advantages: they are free of contact, do not require lubrication, are not subject to the contamination of wear, have endurance, and control performance very well. The AMB is the important technology for the helium blower. The axial and radial AMB must have enough lifting capacity and reliability to support the rotor. In this paper, the structure and system characteristics of the helium blower will be discussed. The electromagnetic field analysis and the structure design of AMB will be described in detail. And the engineering prototype of helium blower with the AMB has been produced. Many experiments based on the engineering prototype with the AMB are being carried out, and the experiment’s scheme and plan will also be explained in this paper. These results will offer the important theoretical base and experience in the engineering application for the AMB design of the helium blower of HTR-PM.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
