Technical considerations on the 3D printing components with DLP 3D printing process with ecological resin

Abstract

The purpose of this work is to analyse the technological aspects of the realization of components by 3D printing for the production of plan parts for experimental devices or stands. The author of this work envisages the realization of flat elements to which it can be determined how the organic resin material behaves when printing 3D with additive DLP technology. The work is structured in 5 chapters. In the first chapter, an analysis of how to make the plan elements by the additive DLP technology specific to the experimental programme adopted in this paper. The analysis will be carried out both constructively and functionally taking into account possibilities for designing components and making them. Chapter two is allocated to ordering technological parameters for 3D printing generation of parts defining the main technical parameters for generating them with ecological resin. The next chapter is allocated to analysing how to carry out the printer command program and check the structure of the element. In the four chapter, the dimensional measurement and control programme with dimensional and optical is presented. The last chapter is allocated to conclusions and comparisons from a technological point of view compared to other specific technologies for generating the analysed elements.