Abstract

The lateritic soils collected from a tea garden were used to explore the regeneration process using different O2 contents for high-temperature desulfurization. The desulfurization and regeneration experiments were carried out using a fixed-bed reactor at 500°C and the gaseous mixture composed of 1% H2S, 25% CO, 15% H2, and balance N2 for the desulfurization process. Experimental results showed that the regenerability is better when the air was used as a regeneration gas and the regeneration time is shortened. Multiple regeneration experiments indicated that lateritic soils can be regenerated by passing air and can thus be reused many times and its regeneration efficiency is slightly better than that regenerated by 1% O2. The sulfur capacity after air desulfurization/regeneration cycles was examined by elemental analysis with a value ranging from 1.40% to 1.49%, and residual sulfur was detected with a value of 0.12% after the diluted 1% O2 regeneration. No sulfur was detected for the regenerated lateritic soil after air regeneration. From NMR structural identification, the 6-coordinated octahedral structure of Al and trioctahedral coordinated Si are the major Al-containing and Si-containing compounds. Broad shoulder peaks were detected after regeneration process that may be associated with the formation of aluminosilicate and further reduces the dispersion of iron on the surface of lateritic soils.

Highlights

  • Hot coal gas desulfurization (HGD) is an essential procedure for advanced power generation system, such as the integrated gasification combined cycle (IGCC) and solid oxide fuel cell (SOFC) technologies

  • Regeneration is an important procedure in the HGD system. rough the regeneration reaction, the metal sulfides can be completely converted into metal oxides, and the metal oxides can be used for numerous cycles. e scheme of regeneration reaction can be represented as follows: MSx + 1.5xO2 ↔ MOx + xSO2 (2)

  • Considering the overall operating cost, the regeneration process has to be operated at high temperature with diluted oxygen to avoid the exothermic reaction and further causes a deactivation of metal oxides. is shortcoming of use of diluted oxygen leads to a long-time regeneration reaction

Read more

Summary

Introduction

Hot coal gas desulfurization (HGD) is an essential procedure for advanced power generation system, such as the integrated gasification combined cycle (IGCC) and solid oxide fuel cell (SOFC) technologies. One of the crucial criteria in the development of the HGD for IGCC and SOFC is the need for a high sulfur capacity, low overall cost, high utilization, eco-friendly, and regenerable sorbent [1, 2]. E basic desulfurization scheme is expressed by the following reaction: MOx + xH2S ↔ MSx + xH2O (1). E scheme of regeneration reaction can be represented as follows: MSx + 1.5xO2 ↔ MOx + xSO2. Considering the overall operating cost, the regeneration process has to be operated at high temperature with diluted oxygen to avoid the exothermic reaction and further causes a deactivation of metal oxides. We have investigated a series of laterites on the application of high-temperature desulfurization, and the results indicated that laterites are the potential material for high-temperature desulfurization [7, 8]

Journal of Chemistry
Results and Discussions
Air regeneration
Conclusions
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call