Tapered RAC-filled high-strength double-skin steel tubular stub columns: Tests and numerical analysis

Abstract

This study experimentally and numerically explores the axial-compression behaviours of tapered recycled aggregate concrete-filled high-strength double skin steel tubular (RAC-FHDST) stub column. Twelve specimens were fabricated and tested, considering the effects of tapered angle, hollow ratio and replacement level of coarse recycled aggregate (CRA). The experimental results, consisting of deformation patterns, axial load versus strain responses and confining effect from external high-strength steel tube were obtained and analyzed. Failure mode showed that all stub columns exhibited good ductile behaviour. The elastic stiffness and ultimate strength of RAC-FHDSTs decreased with rising tapered angles, while the ductile index increased. As the replacement levels of CRA varied from 0% to 100%, the elastic stiffness and ductility index obviously reduced. Larger confining effect from outer steel tube to RAC occurred close to the top section of specimens, and the occurrence of confinement was advanced with decreasing hollow ratio and increasing CRA content. Additionally, detailed numerical models were constructed and validated using experiment results. The validated finite element (FE) models were then employed to analyze the working mechanism of specimen, encompassing the load distributions and the interaction between the sandwiched RAC and steel tubes. Afterwards, a parametric study was performed to reveal the influences of essential parameters on the axial compressive performance. Finally, the existing design approaches to normal CFST and CFDST stub columns were employed to assess their applicability for estimating the ultimate strengths of tapered RAC-FHDSTs.