Tannic acid's role as both char former and blowing agent in epoxy‐based intumescent fire retardants

Abstract

AbstractA novel intumescent fire‐retardant coating formulation has been developed by taking advantage of the inherent stability of large cyclic polyphenols (e.g., tannic acid) to remove the need for a dedicated blowing agent, specifically melamine. Cone calorimetry data indicate a lower fire growth rate (FIGRA) (5.0 ± 1.3 vs. 2.4 ± 0.7 kW m−2 s−1) upon removal of melamine. Total smoke release (TSR) increases following this removal (178 ± 21.4 vs. 305 ± 13.2 m2 m−2), which indicates the role of tannic acid in gas generation. Thermogravimetric analysis resulted in similar residue yield from the examined systems (36 ± 1.3% vs. 34 ± 1.7%) despite removal of a dedicated blowing agent. These results indicate that tannic acids multistep degradation allows it to behave as both a char forming and blowing agent in intumescent systems. The observed reduction of acid loading between the melamine‐tannin system and the melamine‐free composition (15.6% vs. 10.6% wt. ammonium polyphosphate, respectively) is also significant. Tannic acid occurs in agricultural waste products, which is encouraging for the pursuit of sustainable chemistry and addressing potential adverse health effects in humans combined with reducing the overall phosphorous loading.Highlights Melamine was removed from the intumescent without compromising stability. The resulting intumescent char was stronger despite less expansion. Tannic acid is attributed as both the charring and blowing agent. The tannin‐based coating requires a lower acid loading for similar performance.