Abstract

The basic properties of a Talbot interferometer implementing pinhole arrays were experimentally and numerically investigated for the improvement of measurement sensitivity of laser wavefront sensors utilized for electron density imaging over discharge plasmas. A numerical simulation using a plane wave decomposition method indicated that the pinhole arrays with a pitch of 300 μm and a pinhole diameter of 150 μm were most suitable for the measurement of the millimetre-scale discharge plasmas, in consideration of the spatial resolution and measurement accuracy. The plane wave decomposition simulation expected that the measurement sensitivity of the 8th-Talbot-length interferometer could be improved by a factor of 4 compared with the previously developed Shack-Hartmann type laser wavefront sensors, which was experimentally verified by the self-image behavior of the pinhole arrays. The Talbot interferometric system was successfully used for electron density imaging over the vacuum arcs generated between a 3-mm gap. The electron density image observed by the Talbot interferometers was in excellent agreement with that visualized by the previously developed Shack-Hartmann sensors. The practical notification for the pinhole array fabrication was also presented.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call