Abstract
Potentiostatic electrodeposition with novel double cathodes was employed to fabricate a nano-MnO2 loading porous tubular Ti membrane electrode (γ-MnO2/Ti) used for the selective oxidation of cyclohexane (CHA) to yield cyclohexanol (A) or cyclohexanone (K) (KA oil). The effect of operating voltage on the electrochemical properties and morphology of the MnOx/Ti electrode was investigated in detail. Results showed that γ-MnO2/Ti electrodes with three uniform morphologies such as nanoparticles (NPs), nanowires (NWs) or nanosheets (NSs) were tailored by regulating the electrodeposition voltage from 0.5 to 2.0 V. The γ-MnO2 NWs/Ti electrode displayed a high electron transfer rate and large effective electrocatalytic specific surface area as well as the best electrochemical performance. Specifically, the γ-MnO2NWs/Ti was employed as the anode to constitute an electrocatalytic membrane reactor (ECMR) for KA oil production. Over 99% selectivity for KA oil and 32.4% conversion of CHA were obtained by ECMR. Simultaneously, the γ-MnO2 NWs/Ti electrode also exhibited superior stability as a result of the high binding energy between γ-MnO2NWS catalysts and the Ti substrate, leading to the formation of new Ti–O–Mn bonds. In summary, this work provides a new approach to tailor nanocatalyst-loaded membrane electrodes for heterogeneous electrochemical catalysis.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.