Tailoring the Microstructure using Quenching and Partitioning Processing in a Commercial Mn-Si-Cr Spring Steel to Improve Tensile Properties

Abstract

AbstractThis study explores a novel approach to quenching and partitioning (Q&P) heat treatment applied to AISI 9260 spring steel, comprising Fe-0.65C-1.58Mn-1.05Si-0.41Cr (wt.%). Our research focuses on balancing strength and ductility through optimized Q&P pathways, leading to a diverse microstructure that includes martensite, bainite, carbide, and retained austenite. Advanced X-ray diffraction and scanning electron microscopy techniques were employed to analyze the complexities of this microstructure. A key aspect of this study is the precise control of partitioning temperature and time, crucial for modulating lattice distortion and dislocation density within martensitic and bainitic structures. Optimal partitioning temperature promotes carbon distribution into austenite, tempering lattice distortions, and dislocation densities. Concurrently, carbide precipitation and segregation contribute to the refinement of the bainite phase. The sample quenched at 125 °C and partitioned at 350 °C (Q&P-125/350) demonstrates notable mechanical properties: a yield strength of 950 ± 15 MPa, an ultimate tensile strength of 1710 ± 15 MPa, and an elongation of approximately 9.7%. These results are partly attributed to the effect of silicon in preventing cementite coarsening and the effective distribution of carbide. Our findings highlight the potential of Q&P heat treatment in developing tailored microstructures with enhanced mechanical properties in steel, without relying on costly alloying elements. This approach presents new avenues for the design and application of high-performance materials.