Tailoring the Coefficient of Chemical Expansion in Perovskite Oxides through A Vs. B-Site Multivalent Cation Placement

Abstract

Chemical expansion is a strain induced by a change in stoichiometry, such as oxygen loss. It can enable a material to actuate when exposed to different gas environments, and it can significantly impact device longevity when there are large concentration gradients across small material dimensions in multilayer devices. The desired magnitude of chemical expansion depends on the application; typically, the goal is a large expansion in the former and a small expansion in the latter, where compatibility with neighboring materials is of concern. Therefore, design rules for tailoring expansion from oxygen exchange are needed for the multitude of applications in which it is a contributing factor.As oxygen leaves an oxide lattice during reduction, electrons are generated to preserve charge neutrality, which may move to multivalent cations; this process results in significant expansion of the multivalent cation, and the surrounding lattice, as the oxidation state of the multivalent cation decreases. Recently, an empirical formula describing the pseudo-cubic lattice constant of perovskite materials was developed [1], which relates the lattice parameter to the ionic radii of each cationic and anionic component. This equation predicts that changes in the B-site cation size will have a larger effect on the lattice parameter than an equal change at the A-site. If the multivalent cation is the only one changing size during redox processes, this equation suggests that its placement on the A or B site will have a significant effect on the magnitude of the overall lattice strain during oxygen loss or gain.To test this theory, model perovskite bulk ceramic compositions with multivalent Pr(3+,4+) on the A site and on the B site were fabricated: PrGa0.9Mg0.1O2.95+ δ and BaPr0.9Y0.1O2.95- δ, respectively. Strain values from dilatometry and defect concentrations from thermogravimetric analysis were used to calculate the coefficients of chemical expansion (CCE) in both materials, to determine the effect of multivalent cation placement. These measurements were performed under isothermal conditions while varying the pO2 to avoid effects from nonuniform thermal expansion at different stoichiometries. Multiple temperatures were analyzed to observe any temperature-related trends in CCEs and to determine any effects from crystal structure changes. The resulting CCEs will be interpreted not only in terms of multivalent A vs. B site placement but also considering other factors that may impact CCEs: crystallographic distortions, temperature, and charge localization.[1] Marrocchelli, D., Perry, N. H., & Bishop, S. R. (2015). Understanding chemical expansion in perovskite-structured oxides. Physical Chemistry Chemical Physics, 17(15), 10028-10039.