Tailoring interfacial shear strength of SiC fiber-reinforced brittle matrix composites

Abstract

The interfacial shear strength of Nicalon SiC fiber-reinforced glass-ceramic matrix composites was aimed to be tailored via two methods: (1) varying of the thickness of the carbon-rich interfacial layer between the fiber and the matrix by controlling hot pressing period and (2) formation of the secondary interfacial layer, TaC, at the carbon/matrix boundary by doping the Ta 2O 5 matrix addition. In the series of composites with varying carbon-rich layer thickness, fiber/matrix debonding mostly occurred at the carbon/matrix boundary and hence the increase in the carbon-rich layer thickness did not cause any apparent changes in the interfacial shear strength. In the TaC formed series of composites, the interfacial shear strength was affected considerably by the presence of the TaC phase at carbon/matrix boundary. The Ta 2O 5 addition to control the quantity of the TaC phase has shown to be a useful method to tailor the interfacial shear strength of SiC fiber/glass-ceramic composites.