Abstract
Despite advances in the development of photoelectrochemical (PEC) sensor, modulating the PEC response of assembled heterostructure interface is still a great challenge. Here, an ultrasensitive PEC aptasensor for tobramycin (TOB) assay was conducted based on one-dimensional/two-dimensional CdS nanorods@ZnIn2S4 nanosheets (1D/2D CdS NRs@ZnIn2S4 NSs) heterojunctions by tailoring enzymatic loading capacity. Firstly, alkaline phosphatase modified TOB aptamer (ALP-Apt) was linked via specific base complementary pairing, and insoluble precipitations were then produced through the ALP-triggered catalytic reaction with the aid of Ag+, which prevented the charge transfer and resulted in the decrement of photocurrent. In the presence of TOB, partial ALP-Apt detached from the electrode surface due to the strong affinity between TOB and its aptamer, leading to a reduction in the amount of ALP and insoluble precipitate, in turn the PEC response partially recovered. The photocurrents exhibited a wider linear range towards the TOB concentration of 1.0–5.0 × 104 pg mL−1, with a low detection limit of 0.96 pg mL−1. The constructed PEC aptasensor gained satisfactory results for TOB assay in milk samples as well, which also offered significant promise for other pollutants in environmental analysis.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
