Tailored heterogeneity increases overall stability regime of composites having a negative-stiffness inclusion

Abstract

Recent theoretical and experimental results have shown the possibility of enormous increases in composite material overall elastic stiffness, damping, thermal expansion, piezoelectricity, etc., when the composite contains a tuned non-positive-definite (i.e., negative stiffness) constituent. For such composite materials to have practical utility, they must be stable. Recent research has shown they can be, for a limited range of constituent negative stiffness. This research has treated linear elastic composite materials with homogeneous phases, via the energy method and full dynamic stability analyses.In the present work, we first show how to analyze the composites previously treated by the comprehensive but simpler static stability approach, obtaining closed-form results. We then employ this approach to show that permitting heterogeneity of the positive-definite phase can substantially increase the range of constituent negative stiffness while maintaining overall composite stability. We first treat the positive-definite phase heterogeneity as piecewise homogeneous, and then treat it as continuously-varying. In the continuously-varying heterogeneity case, we seek the radially optimal distribution of the elastic moduli in the coatings, under constant coating average moduli constraint, to permit the most negative possible inclusion stiffness while maintaining overall composite stability. This is accomplished for three coating cases: constant bulk modulus but arbitrarily radially-varying shear modulus; constant shear modulus but arbitrarily radially-varying bulk modulus; and both moduli arbitrarily radially varying. We find the optimal coatings to be: a heterogeneous one with shear modulus being a specific continuously decreasing function of radius for the first case; a homogeneous one for the second case; and a heterogeneous one with both moduli being either Dirac-delta or Heaviside-step decreasing functions of radius for the last case (if the coating moduli are unrestricted in magnitude or have upper limits, respectively). The results show a substantial increase in the permissible inclusion negative stiffness range is provided by coating heterogeneity, while maintaining overall composite stability. Such an increased range of constituent negative stiffness provides an enlarged tuning parameter range for the development of novel, high-performance composite materials.