Tailorable mechanical and energy absorption behaviors of 3D printed continuous hybrid fiber reinforced composites

Abstract

Abstract3D printing of continuous fiber‐reinforced thermoplastic composites (CFRPCs) has expanded potential structural application in recent years. However, it is still challenging to tailor the mechanical and energy absorption properties of 3D‐printed composites to fulfill the requirements for critical application conditions. Herein, hybrid fiber (HF) reinforced composites have been prepared by 3D printing of CFRPCs and investigated on the mechanical and energy absorption behaviors. Continuous virgin carbon fibers (CF), Kevlar fibers (KF) (130 Deniers (D), and 200 Deniers (D)) and E‐glass fibers (GF) were used as reinforcing fibers to produce hybrid and non‐hybrids composites. Hybrid composites with different combination of CF + GF, CF + 130D KF, and CF + 200D KF showed tailorable behaviors, such as flexural modulus (16,691.74, 20,372.38, and 19,017.44 MPa), tensile modulus (15,022.6, 16,269.41, and 15,320.58 MPa). And energy absorption behaviors of CF + 130D KF and CF + 200D KF were tailored in both tensile (18,865.25 and 20,302.07 N‐mm, respectively) and bending (3594.54 and 3570.80 N‐mm, respectively) tests compared to other composites which will be ideal for energy absorption applications. Moreover, CF + GF showed tailored strength which could be used in the need of high stiffness. SEM images were providing strong evidence to resist the fracture and breakage patterns, by tailoring the stiffness and elongation properties of fibers in hybrids specimens. Furthermore, positive hybrid effects of CF + KF hybrids in tensile and bending tests were also showing an ideal match of toughness and flexibility. In future, these cost and weight effective hybrids will have potential to apply in aerospace and automobile.