Taguchi-based combined grey relational and principal component analyses for multi-response optimization of diesel engines

Abstract

PurposeDiesel engine can produce power more efficiently with lower exhaust emissions when operated at optimum input parameter settings. To achieve this goal, the purpose of this paper is to optimize the input parameters of diesel engine which will lead to optimum performance and exhaust emissions.Design/methodology/approachTo achieve the goal of improving diesel engine performance and exhaust emissions, four input parameters were considered in the study. Five different levels of each input parameter were taken. Four response variables under no load, half load and full load conditions were recorded. Experiments were performed in random manner according to selected Taguchi L25 orthogonal array. The data were analyzed using grey relational analysis coupled with principal component analysis. Analysis of S/N ratio was performed to obtain the optimum combination of input parameters. The grey relational grade at optimum setting of the input parameters was obtained by regression analysis.FindingsResults of the current research work give the optimum input parameter settings for no load, half load and full load conditions of diesel engine. Engine produces power more efficiently with low exhaust emissions when operated at these optimum settings.Practical implicationsIn view of the compliance to the stringent air pollution norms of the nations and fast depleting fossil fuels, it is of the utmost importance to design and operate the engine in the optimum range of its input parameters so that it produces more power with low exhaust emissions. This paper aims at optimizing input parameters of diesel engine to improve performance and exhaust emissions. Results of the study presented in this paper are significantly useful for diesel engine-related researchers and professionals.Originality/valueFrom the literature review, it appears that only few researchers have conducted studies pertaining to the optimization of the input parameters of diesel engine to improve performance or exhaust emissions. Although few studies related to the optimization of compression ratio, fuel injection timing, fuel injection pressure and air pressure have been reported, no work related to optimization of temperature and pressure of turbocharged air has been reported. Therefore, the main focus of the current research work is on optimizing the charge air temperature and pressure with respect to performance and exhaust emissions.