Abstract
The near equiatomic Ti-51at %Ni alloy has excellent corrosion resistance, strength, shape memory and pseudo-elastic behaviour. However, it is lacking biocompatibility due to the release of hazardous Ni-ions when used as an implant. Thus, this research proposes optimizing the fabrication of multilayer Ti/TiN coating on Ti-51at %Ni alloy using magnetron sputtering. The hardness and adhesion strength are crucial properties to sustain external bearing loads and to ensure the durability of the coating. The process parameters of magnetron sputtering were optimized using Taguchi method. The analysis showed that optimum adhesion strength was obtained at 370 W, 100 °C, 50 V and 5 sccm with respect to DC power, substrate temperature, bias voltage and nitrogen flow, respectively. Whereas, the optimum hardness was obtained at 370 W, 150 °C, 75 V and 5 sccm. The confirmation test evidenced the hardness and adhesion strength improvement by 6.83 % and 10.74 %, respectively. The results of the optimized substrate surface showed a dense and compact growth of the deposited layer with the absence of cracks and pores. Finally, this research demonstrated a promising durable multilayer Ti/TiN coating on Ti-51at %Ni for biomedical applications.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
