Taguchi analysis of fabric shrinkage

Abstract

This article reports on the effects of fabric constructional factors such as fabric sett, warp tension, back rest position, and pick insertion rate, on the warp-way and weft-way shrinkages of a three-up-one-down twill woven fabric using a Taguchi design of experiments. It was observed that the fabric shrinkage in the warp direction was mostly affected by the change in the number of picks per inch, followed by warp tension, number of ends per inch, number of picks per minute, and back rest position, respectively. The fabric shrinkage in the weft direction was found to be mostly affected by the change in number of ends per inch, followed by number of picks per inch, back rest position, number of picks per minute, respectively and least affected by warp tension. It was observed that the aforesaid five factors were able to explain 99.02 % and 82.81 % of the total variation of fabric shrinkage in the warp and weft directions, respectively.