Systolic architecture for adaptive block FIR filter for throughput using distributed arithmetic

Abstract

In this paper, the design of distributed arithmetic (DA) finite impulse response (FIR) filter using block least mean square algorithm (BLMS) based on systolic array architecture with parallel data processing units is presented. A high level of parallelism is observed in the proposed work, improving the efficiency of variable coefficient FIR structure. The parallel look-up tables (LUT) in combination with the shift accumulator emulate multiply and accumulate operations. In order to reduce the number of clock cycles, B parallel LUTs are used, where B is the coefficient size. The block processing in BLMS Adaptive FIR Filter of block length L gives L times high throughput. This structure accepts block of input samples and generates block of output in each clock cycle. It requires less number of registers for computing filter output response and weight increment vector as memory reuse concept is used for implementing registers. This structure doesn’t require multiplexer. The designed DA based FIR filter is implemented on FPGA. The implementation results shows that the manuscript presents a high speed and low power architecture. The proposed structure provides 17.3 times less power and 9.5 times increase in throughput when compared to existing designs.