Systematic Research on the Heat Dissipation Channel of High Power LED Street Lamps

Abstract

This article mainly studies the thermal characteristics of light source of the street lamp, and systematically analyzes the effective ways of heat transfer and heat dissipation of street lamp. Based on experiments and finite element simulations, the heat dissipation channels of street lights were studied, and the weak links of heat transfer and heat dissipation were analyzed, and the heat dissipation structure of street lamp was optimized. The experimental results show that the junction temperature of the chip is lower than 90 °C in the steady state, and the luminous efficiency decreases by 5.93%. In order to ensure the efficiency and reliability of the street lamp, it is recommended that the junction temperature of the street lamp be controlled below 85 °C. After analyzing the arrangement of the chips, silicone grease with different thermal conductivity and aluminum substrate, it is found that the substrate is the bottleneck affecting effective heat transfer, and the use of diamond like carbon metal core printed circuit board (DLC-MCPCB) can reduce the junction temperature by 17.04 °C. Through the grid design of shell of the street lamp, the heat dissipation effect of the street lamp surface can be enhanced, and the junction temperature can be reduced by 7.04 °C. Based on these studies, the optimal design model of street lamp was obtained, which provides guidance for practical applications.