Abstract
About 1000 solar thermal cooling systems have been installed worldwide, so experience with system sizing and design is limited. To counter the lack of experience and to evaluate the potential of energy and cost efficient solar cooling systems, a systematic system design study has been carried out covering most climatic regions worldwide. For each technology investigated, an energy optimized control strategy was developed which maximizes the primary energy efficiency.It could be shown that a reduction of nominal chiller power by 30%–40% or more hardly affects the solar cooling fraction for most climates, but significantly increases the machine operating hours and thus improves the economics. Single effect absorption cooling systems easily reach 80% solar cooling fraction for all but very humid climates. Primary energy ratios can be over 3.0 and primary energy savings between 30 and 79%, depending on system design and cooling load data.The economic analysis shows that solar thermal cooling and heating is more viable in hot climates than in moderate European climates. To achieve payback times of 10 years with today's energy prices, the investment costs have to be reduced by 30–70% depending on the location and dimensioning.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
