Abstract
AbstractDevelopment of secondary zinc–air batteries goes through a proper specification of the electrolyte formulation adapted to extend the cycle life of the battery. However, defining an optimal formulation is not a trivial work due to the specific requirements for each electrode. At half‐cell level, it has been determined that ZnO‐saturated 4 mol L−1 KOH with 2 mol L−1 KF and 2 mol L−1 K2CO3 (4s‐2) is the most suitable formulation to increase the cycle life of secondary zinc electrode, whereas additive‐free 8 mol L−1 KOH (8‐0) formulation is more beneficial for the bifunctional air electrode (BAE). Through this systematic cycle life assessment, it has been found that the most suitable electrolyte formulation for the full cell system is a compendium for both electrodes requirements. It has determined an optimal electrolyte formulation for the full system consisting of ZnO‐saturated 7 mol L−1 KOH with 1.4 mol L−1 KF and 1.4 mol L−1 K2CO3 (7s‐1.4). This electrolyte composition increases at least 2.5 times the reversibility of the secondary zinc–air battery in comparison with that employing the traditional formulation for primary zinc–air batteries (additive‐free 8 mol L−1 KOH). In addition, the development of a proper cell design or separator is also necessary to further enhance the secondary zinc–air cycle life.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
