Abstract
This paper proposes a design of wireless sensor node powered by piezoelectric vibration energy harvesting system. A complete system level coupling circuit model is established to predict the performance characteristics. The piezoelectric vibration energy harvester (PVEH) is based on a PZT bimorph cantilever, in which a big proof mass is introduced to decrease resonant frequency and a shell served as a stopper to avoid overload. Lumped parameters of the model are identified by experiments and calculations. Electromechanical analogy model of PVEH is simulated in LTspice software. The power consumption of a temperature WSN is tested and the equivalent load model is simulated. A power management circuit (PMC) with LTC3588-1 is designed for rectifying and regulating output of PVEH. Electrical energy is stored in a capacitor. Finally, a system level coupling model is established. Time domain circuit simulation can provide the detailed parameters about the WSN powered by PVEH such as full charge time and sustainable time of the system. Test curves of capacitor charging and WSN power supply in prototype testification show good consistency with the simulation results in LTspice. An application for temperature WSN powered by PVEH is testified as an example. The method and model proposed in this paper can set up a reference to optimize system parameters for WSN powered by PVEH.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.